After intensive testing, the company chose the Hydra-Cell Flow Chemistry and High-Pressure Liquid Chromatography (HPLC) pumps over the incumbent traditional metering pumps because of the advanced mechanical and hydraulic design, with little ancillary equipment required, the high accuracy over the wide flow range and the technical support.

With the hydra-cell pump installed, pumping corrosive salt water is reliable with minimum maintenance, creating a saving of $10K’s per year.

A large meat producer and food-processing company needed to remove watery fluid produced in the gaseous conversion and collected in several dozen underground sumps. The answer was Blackhawk’s Apollo Solar Piston Pump, a simple, non-polluting, durable and cost-effective model that pumps virtually anything that flows.

When installing the equipment, the company prefers to specify and utilize Hydra-Cell pumps in preference to other high-pressure pumps. The small dimensions of Hydra-Cell pumps make them easier to handle and install than many other pumps. Utilising the Hydra-Cell G25 pump, the pressure and flow needed for the automated car washing system met the requirements.

Easy to maintain and install, SATURNevo pumps are designed for seawater applications. They can easily withstand corrosion since they are made of FRP, a corrosion-proof material. 

With no cups, packings or seals, the Hydra-Cell pump is ideally suited to deliver smooth, high pressure seawater to the separation membranes of the reverse osmosis unit.

There are several different Metering Pump technologies; however, the multiple-diaphragm design of Hydra-Cell Metering Solutions pumps provides smooth, linear, virtually pulse-free flow without the need for pulsation dampeners.

Before switching to Hydra-Cell Reverse Osmosis pumps, a large water purification company had to interrupt and slow down their operations due to frequent leakages and a lack of reliability in the critical pumps they were using. With high reliability and little ongoing maintenance, the Hydra-Cell sealless pump solved these problems.

The circulating lubrication oil system is essential for cooling and lubricating all kinds of rotating machinery.

With its seal-less design, Hydra-Cell has no seals to leak, wear, or replace. After more than 1-1/2 years of continuous operation, the only maintenance required has been to replace a belt for the motor drive, an easy fix, according to the owner.

Twin screw technology provides solution, reduces contamination risk.

When a producer of ice cream went looking for a pump for its chocolate ice cream toppings, the Graco SaniForce 2150e proved unbeatable!