Plant Fire Water Pump System
Plant Fire Water Pump Skid – 144 m3/h @ 87.3m TDH – AS 2941:2013. The pumps are mounted onto a single steel epoxy-painted base frame with valves and pipework. The fabricated skid base includes lifting lugs and vibration mounts for the diesel engine, control panel and dual-skinned fuel tank.
Diesel Driven Fire Water Pump complying with AS2941:2013
- Grundfos NKG 125-80-315 End-Suction Pump
- Cast Iron casing / Stainless impeller / 431SS shaft
- SiC/SiC mechanical seal
- CAT 3054CT diesel engine
- Heavy-duty muffler and air cleaner, suitable for mine site use
- Drive shaft with torsional coupling
- Circulation relief valve to protect from overheating during no/low flow.
- 100mm suction and discharge liquid-filled pressure gauges
- Stainless steel nameplate with AS2941-compliant data
- 160L single-skinned fuel tank with vibration mounts
Electric Driven Fire Water Pump complying with AS 2941:2013
- Grundfos NKG 125-80-250 End-Suction Pump
- Cast Iron casing / Stainless impeller / 431SS shaft
- SiC/SiC mechanical seal
- WEG make 75 kW, 2-pole IP66 electric motor
- Circulation relief valve to protect from overheating during no/ low flow
- 100mm suction & discharge liquid-filled pressure gauges
- Stainless steel nameplate with AS2941 compliant data
Jockey Pump
- Grundfos CRI 1-15 Vertical Multistage Pump
- 304 Stainless Steel chamber and impellers
- Balanced SiC/SiC cartridge seal
- WEG make 0.75 kW 400-415V 2 Pole Motor
- Stainless Steel Name Plate with AS2941 compliant Data