Diesel Driven Fire Water Pump complying with FM 3-7

Product details:

• Patterson 5x4 E4J11A End Suction Engine Driven Pump
• Rated 750 GPM @ 104 PSI
  • Construction materials are Cast Iron casing with Zinc Free Bronze impeller & AISI 1141 shaft.
  • Packed Gland sealing
  • ANSI 125# Flanges
• Clarke JU4H-UF54 Tier 1 Diesel Engine
  • FM Approved
  • Heat Exchanger Cooled
  • Rated 145HP @ 2980rpm
• Firetrol FTA1100 FM Approved Control Panel
• 1” Automatic air relief valve
• 100mm Stainless case pressure gauges
• 350L Dual Skin fuel tank, Fabricated by Dynapumps to AS1692 (Installed on common skid)
• Relief valve and waste cone
• Dynapumps built baseplate in accordance
  • Galvanized
• Safety Guards in accordance
• DN200 Suction and DN150 Discharge Pipework
• Victaulic UL/FM check valve on discharge
• Hard pipe (copper) pressure sensing line
• FAT Test at Dynapumps
• Conditioning Monitoring includes the following;
  • Two quantity CTC TA 104-1A on pump only.
  • Connected to a JB330-6C Junction Box with armoured cable.
• Junction Box mounted onto a Galvanised skid